Cotton/lycra jersey knit skirt with 5" (13 cm) waistband and gathered skirt body. The circumference of the finished skirt body (ungathered) is 1.5 times the hip circumference, and the length of the finished skirt body is 19.5" (50 cm).
For a fuller version which has a skirt body circumference that is twice the hip circumference, see the post How to Make a Gathered Skirt with Knit Waistband.
- Knit fabric with at least 40% stretch (you could use a lightweight woven for the skirt body and just use the stretch knit for the waistband)
Measuring and Cutting
- Waistband: Cut 1 rectangle from your fabric as shown in Diagram 1.
- Skirt Body: Cut 2 rectangles from your fabric as shown in Diagram 1. To determine the skirt body length, measure from where you want the bottom edge of the waistband to hit on you hips down to your desired hemline, and add 1" (25 mm) for seam allowances.
For example, I cut the skirt body 20.5" (52 cm) long for a skirt that hits just below the knees.
Note for the Length (L): The waistband length of 11" (28 cm) used in Diagram 1 creates a finished waistband that is 5" (13 cm) thick. For a different waistband thickness, multiply the desired thickness by 2 and add 1" (25 mm) for seam allowances. For example, for a 3" (76 mm) thick finished waistband, cut a length of 7" (18 cm).
Note for the Width (W): For the best fit, you can figure out exactly how wide to cut the fabric for your waistband. Wrap a folded piece of your fabric crosswise around your waist where you want the waistband to be, stretching it for a snug fit. Mark the width and add 1" (25 mm) for seam allowances.
Sewing the Waistband
- First we’re going to sew the waistband into a tube that will fit around your waist; it will have only one seam, which will be at the center back (CB). To do this, fold the width of the waistband in half with right sides together and sew the lengthwise raw edges (i.e., the edges that are 11" in length) together, as shown in Diagram 2.
- Now fold the length of the waistband in half with the wrong sides together, as shown in Diagram 3, and pin in place.
- Divide the waistband into quarters by marking the raw edges at center front (CF) and at each side using chalk or a fabric marker.
Sewing the Skirt
- With right sides together, sew the side seams of the skirt body.
- Divide the skirt into quarters by marking the top edge of the skirt body at CF and CB using chalk or a fabric marker.
- Sew a gathering stitch (i.e., a long, straight stitch with the tension loosened) with contrasting thread 0.375" (10 mm) from the top edge of the skirt body, starting and stopping at each side seam and leaving long thread ends.
- Pull the thread ends of the gathering stitch to gather the skirt body to the width of the waistband, distributing the gathering evenly across each quarter section of the skirt body.
Attaching the Waistband to the Skirt Body
- Pin the top edge of the skirt body to the (raw-edged) bottom of the folded waistband, with right sides together and with quarter markings aligned. With the skirt body facing up, sew the skirt to the waistband using a stretch stitch, as shown in Diagram 4.
- Remove the gathering stitches from the skirt body.
- Hem the skirt (optional for jersey knit) by folding the hem edge 0.25" (6 mm) to the wrong side twice, as shown in Diagram 5. Sew along the upper edge of the hem.