Jersey/spandex fabric headband 2" (51 mm) wide by 17" (43 cm) in circumference.
You can find a simple jersey headband in stores for pretty cheap, like this American Apparel headband for $8. But if you have some scrap fabric or a t-shirt that you don’t wear lying around, you easily can sew one yourself.
Materials: Jersey knit/spandex blend fabric
- For a 2" (51 mm) wide headband, cut 1 rectangle from your fabric as shown in Diagram 1.
- Fold the short sides of the headband in half with right sides together. With a 0.25" (6 mm) seam allowance and using a stretch stitch, sew the long raw edges together to create a tube, stopping and starting about 1.5" (38 mm) away from each end. See Diagram 2.
- Turn the tube right side out.
- With right sides together and using a 0.25" (6 mm) seam allowance, sew the short ends of the headband together as shown in Diagram 3. It will be tricky to get the short ends to lay flat to sew them together, so you may have to pin and sew a portion at a time.
- Fold the seam back into the inside of the tube. Tuck the raw edges at the opening to the inside of the tube and slipstitch the opening closed.
- Press the headband so that the seams lay flat.
Note for the length: You’ll need a length of approximately 17-19" (43-48 cm), but it depends on the stretchiness of your fabric and the size of your head. Try wrapping a folded piece of your fabric around your head to figure out the exact length, adding in an extra 0.5" (13 mm) for seam allowances.
Note for the width: If you want a different width for your headband, multiply your desired finished headband width by two and add 0.5" (13 mm) to determine the width of fabric to cut.